Electroluminescent Car Sticker (200mmX150mm)

Electroluminescent car sticker:
EL Operating Theory:
EL is an equipment that converts electronic power to light. The general working voltage and frequency of EL lighting source can be turned from AC40V to AC220V and frequency can be turned from 50Hz to 4000Hz. Increasing the voltage can increase the lighting degree of EL. Increasing frequency has the same function, but the color of the EL lighting source might be blue.
EL Illuminating Theory
Theory is the material layer converts the electrical power into light, illustrating as the following:
EL Life Time. Lighting Degree:
EL lighting source is not the same as the traditional one to cut off immediately. But after a long time use, the lighting degree will reduce little by little. Voltage, frequency, temperature, and humidity are all the important factors that affect the EL life time.
Common EL: 150CD(m2), halflife: 2000 hrs lifetime: 8000 hrs/50 CD/m2 60R. H.
High light EL: 300CD(m2), halflife: 2000 hrs lifetime: 8000 hrs /100 CD/m2 60R. H.
EL Weight, Thickness and Bend Toughness:
EL is light and slim. Generally, bending above 3cm can be acceptable, and can make any form you like, just like a paper, which is the main characteristic of EL. Average parameter as follows; But to some special order, the parameter may change.
Everage weight: 0.1-0.2g/cm2
Everage thickness: 0.4mm-0.7mm
EL Edge Closed:
In the lighting space, this is at least 0.1cm closed round the edge. If the closed edge is toothin, it may cause mini-change. So it will be suggested that closed edge should keep the suitable width.

EL Color:
The basic standard illuminating ground of EL are blue-green, blue, pink/white. Besides the basic color, in the special range, we can make bright-colored effect by using the combination of special painting dyes and color sheet.
EL Dimension:
At present, the maximum dimension we can make is within 60cmX90cm(signal square).
Driven Source Of EL--INVERTER:
The cause of the lighting source is driven by a matched driver. That the voltage and frequency that driven the EL depend on thecondition of the square, lighting degree, using environment, life time ect.
We can design the EL driver according to customers' requirements, for example:
1. Using DC 3V. 6V. 9V. 12V battery power to design Inverter to drive the lighting of EL.
2. Using DC12, 24V power of car and motorcycle to design Inverter to drive the lighting of EL.
3. Using indoor power of AC110-230V to design Inverter to drive the lighting of EL.

The Advantage Of EL Poster
1. Extra save electric power, short-wave lighting, no radiation, bright and remarkable in the night, which can attract the Passengers.
2. The capacity of focusing light is strong. The distance may be very far but strong attraction.
3. Extra-thin, light. It's easy to manufacture and put in use and save engineering cost. Upgrading the human resources And efficiency.
4. As its easy to be equipped, it has strong scattering capacity and ad mobilization.
5. With its novelty and attraction, it can get effect of ad or expected.
6. EL can be made by the clients. Needs. And we can produce EL product of different dimension and shape you want.
7. Besides making continuous light and flash function, it also can be made soft dimming or multisection flash mode, So we can meet different customers requirements.